es-ESen-US

Multi-level Circular Process Chain for Carbon and Glass Fibre Composites

News Preimpregnated materials

Multi-level Circular Process Chain for Carbon and Glass Fibre Composites


FIDAMC participates with other 14 companies in MC4 consortium within the project: “Multi-level Circular Process Chain for Carbon and Glass Fibre Composites”. Two main challenges will be faced: on one hand recycling of elements of carbon and glass fibre at the end of their end of life and on the other the recycling of the scrap produced during the manufacturing process.

The length of the projects is three years and at the end it will be expected to add value to the composites materials industry, helping to solve waste management.

The official abstract of the project is shown below:

“Each year about 110.000t of carbon fiber composite parts and 4.500.000t of glass fiber composites are used. 98% of these parts end up in landfills at the end of their life. To address this problem the MC4 project aims at establishing a multi-level circular process for carbon and glass fiber composite. Multi-level means that processes will be developed for short-term implementation with immediate impact and for the longer term with a wider impact on industry. Carbon and glass fiber have substantially different costs and the project takes this into account by developing economically feasible procedures that are based on chemical matrix/fibre separation for carbon fibre and on a new type of resin for the direct re-use of the composite for glass fibre. Quality grading of the recycled material will be a key element to ensure a proper use in the different domains. Within the supply chain investigated in the project the goal is to achieve a recycling rate of at least 60%.

As an additional benefit, the project will enable European material manufacturers to develop their own, patented processes for manufacturing of recycled material. Currently, 80% of the manufacturing of virgin carbon and glass fibre is taking place outside of Europe and the manufacturing technologies used inside of Europe are often licensed from foreign countries.

MC4 puts particular emphasis on the design and manufacturing of best practice examples of parts made from recycled materials. For five different domains, including automotive, aerospace, sports equipment, boats and urban furniture, composite products will be manufactured, with the aim of demonstrating the use of recycled material and enhancing the demand side for recycled material in the different domains.

The consortium includes process developers, material manufacturers and SME end users, who manufacture composite parts. It covers the whole value chain and thus enables the creation of real circular process for composites".

 

PROJECT MAIN INFORMATION

MC4: “Multi-level Circular Process Chain for Carbon and Glass Fibre Composites”

Coordinator: Profactor GMBH

Partners:  FIDAMC, GAIKER, CIDETEC, VDL, STFI, AMURA, MANAGING COMPOSITES, CEA, TECHTERA, 3-B FIBREGLASS, IRES, LAB23, CHOMARAT, I-RED.

Length: 2022-2025

Funding:  HORIZON-CL4-2021-RESILIENCE-01-01

Proposal number: 101057394

Website:  www.mc4-project.eu

 

 

 

 



MC4.png  Financiado.jpg